[peterson76]

Guys,

I need a few files to get my mill running again. I will pay for the files.

Any Fanuc guys or service techs have these files available?

Spindle: 9D0A-0002
Servo: 9090-0010
Graphic1: 600W-001D
Graphic2: 600W-102H

A few hundred dollars in a few minutes!

Please help,
Eric

[ifixcnc]

What machine and control do you have?

[peterson76]

Its a Hitachi Seiki VS50 with Seicos 16M (Fanuc 16i-MA).

I have the Hitachi stuff from DMG Mori Seiki, I just need some Fanuc stuff.

Thanks,
Eric

[shas595]

Eric,

I can try to get a copy of the Servo which is the same, but the spindle I have is 9D0A-0005. Are you still in need?

John

[peterson76]

Hello John,

I have managed to round up most of them and the mill will boot up now but it is still not "right". The spindle version I have on the mill now is 9D00-****.

I have depleted all my repair funds so I am unable to pay for any more files. If you are still willing to send me the files I would appreciate it, but I understand if not.

Thanks,
Eric