I need a quote on milling two blocks from 6061-T6. Overall size of the part is 2.5" x 2" x 3" and I need two of them to start. There are a few pockets milled in 4 of the surfaces and three holes will need to be drilled and tapped.
After testing I will be looking to produce these in batches of 20-40, but this quote is for two parts to allow us to test fitment and function.
I can provide a solid model and drawings as needed but would rather not post them here. let me know what details you need and what type of file your prefer. Thanks in advance for quoting!