Hi Guys,
We have XR5 3D Mill Expert and have it posting to our Haas mills. The post works great for most things but this isn't something we do much, but it would be great to know it will work when we do need to produce this sort of feature.
I have used clean circle with a grooving tool, to put an undercut into a bore. The problem I am getting is that the tool doesn't return to dead centre of the bore before retracting the tool, this causes the grooving tool to machine some of the main bore out.
The hole is X0, Y0, so if I manually programmed it, I would just send the tool back to the X/Y zero before retracting in Z.
Is there any way to get the clean circle cycle to do the same?
It's an 18mm dia tool going into a 18.4mm dia bore and grooving out to 20.4mm dia
Thanks in advance for any help