Hi there,
We have a Haas in our shop whereby the tool coolant is controlled by solenoid at the back of the machine and it has to be turned on manually instead of using G Code (refer to picture 3). The tool coolant was working fine this morning until it stopped working suddenly where there is no air coming out at all. If you look at picture 1, if we would to take the master air hose out and connect it to the tool coolant hose, there is no problem for the air to come out at all.
We are suspecting that it could be a broken solenoid (refer to picture 1) that causing that issue or there might be some other reason for this to happen. Any advice would be helpful.
Thank you very much.
Attachment 227854
Attachment 227856
Attachment 227858