We just got a Chevalier 1418 VMC with anilam 6000m controller. This is our first cnc machine and we just got it wired in and powered up and the servos won't reset. In the back electrical panel on the anilam controller box there are several red lights. The red lights are on all four of the SH 2 (it has four rows of 3 led's- ready, SH 1 and SH 2), Power fail, NC reset and the brake pack has the stop red light lit up. On the controller in the message line it says "activate axis before executing command" but the servos wont reset and nothing changes when you hit the reset button. We are not cnc wizards and need some help getting it up and running. Any info to help guide us in the right direction would be greatly appreciated. Thank you.