Gentlemen, I am in need of some basics. I have a object designed in BobCad V26 that supposedly should just post the usable G-Code for our Fagor 8055M on our 3 Axis CNC. I'm no rookie when it comes to design or design programs; however, I am unfamiliar with G-Codes as I usually just have to pass off the drawings with dimensions on them. The posted G-Code from the object (posted below) gives me an error, saying that there is a conflict on several lines. Even after looking up the code explanations, I'm still none the wiser. I hope that through your collective knowledge, that some of you might be able to assist. I'm an ME, but never really dealt with the machining side of the job until now. Any points in the right direction on this code or areas to help better understand G-Codes as a whole so that I may troubleshoot my own issues will be much appreciated.
Thanks.
The code is for a simple dog bone tension test specimen. Set up is a Summit 3 Axis CNC Mill with a Fagor 8055M panel. I used BobCad V26 for the drawing and code posting.
%100,MX,
; SET AUTOGEAR MACHINE PARAMETER
; PROGRAM NAME: 000370.PIM
; POST: FAGOR 8055M
; DATE: WED. 04/02/2014
; TIME: 07:10AM
N1 G53
N2 G90 G80 G70 G40 G17
;JOB 1 Profile Rough
;PROFILE ROUGH
N3 T1 M06
N4 S1900 M03
N5 G00 G90 G54 X-4.9325 Y0.2813
N6 G43 H1 D1 Z1.
N7 M08
N8 Z0.2
N9 Z0.1
N10 G01 Z-0.125 F10.64
N11 X-1.5039 F21.28
N12 X-1.463 Y0.261
N13 X-1.416 Y0.2412
N14 X-1.3678 Y0.2244
N15 X-1.3186 Y0.2107
N16 X-1.2687 Y0.2001
N17 X-1.2182 Y0.1927
N18 X-1.1673 Y0.1884
N19 X-1.1231 Y0.1875
N20 X1.1273
N21 X1.1312 Y0.1874
N22 X1.1822 Y0.1894
N23 X1.233 Y0.1945
N24 X1.2833 Y0.2029
N25 X1.3331 Y0.2144
N26 X1.382 Y0.229
N27 X1.4299 Y0.2466
N28 X1.5083 Y0.2813
N29 X4.375
N30 X4.9325
N31 Y-0.7813
N32 X1.5039
N33 X1.463 Y-0.761
N34 X1.416 Y-0.7412
N35 X1.3678 Y-0.7244
N36 X1.3186 Y-0.7107
N37 X1.2687 Y-0.7001
N38 X1.2182 Y-0.6927
N39 X1.1673 Y-0.6884
N40 X1.1231 Y-0.6875
N41 X-1.1273
N42 X-1.1312 Y-0.6874
N43 X-1.1822 Y-0.6894
N44 X-1.233 Y-0.6945
N45 X-1.2833 Y-0.7029
N46 X-1.3331 Y-0.7144
N47 X-1.382 Y-0.729
N48 X-1.4299 Y-0.7466
N49 X-1.5083 Y-0.7813
N50 X-4.375
N51 X-4.9325
N52 Y0.2813
N53 G00 Z0.2
N54 Z-0.025
N55 G01 Z-0.25 F10.64
N56 X-1.5039 F21.28
N57 X-1.463 Y0.261
N58 X-1.416 Y0.2412
N59 X-1.3678 Y0.2244
N60 X-1.3186 Y0.2107
N61 X-1.2687 Y0.2001
N62 X-1.2182 Y0.1927
N63 X-1.1673 Y0.1884
N64 X-1.1231 Y0.1875
N65 X1.1273
N66 X1.1312 Y0.1874
N67 X1.1822 Y0.1894
N68 X1.233 Y0.1945
N69 X1.2833 Y0.2029
N70 X1.3331 Y0.2144
N71 X1.382 Y0.229
N72 X1.4299 Y0.2466
N73 X1.5083 Y0.2813
N74 X4.375
N75 X4.9325
N76 Y-0.7813
N77 X1.5039
N78 X1.463 Y-0.761
N79 X1.416 Y-0.7412
N80 X1.3678 Y-0.7244
N81 X1.3186 Y-0.7107
N82 X1.2687 Y-0.7001
N83 X1.2182 Y-0.6927
N84 X1.1673 Y-0.6884
N85 X1.1231 Y-0.6875
N86 X-1.1273
N87 X-1.1312 Y-0.6874
N88 X-1.1822 Y-0.6894
N89 X-1.233 Y-0.6945
N90 X-1.2833 Y-0.7029
N91 X-1.3331 Y-0.7144
N92 X-1.382 Y-0.729
N93 X-1.4299 Y-0.7466
N94 X-1.5083 Y-0.7813
N95 X-4.375
N96 X-4.9325
N97 Y0.2813
N98 G00 Z0.2
N99 Z1.
N100 M09
N101 M05
N102 T1 M06
N103 M30
%