Modifying a 13" set of rotors
https://youtu.be/ZLlprAAAUAY
Bit of mill turning. I now have a Tormach 15L Slant Pro to do this work on.
https://youtu.be/FDupddeBuJ0
Thread milling - testing and final use
https://youtu.be/tOkmPqu8Vl0
https://youtu.be/fdt6nXp5uEk
https://youtu.be/lGoBZnblXkY
"One off" set of brackets I did.
https://youtu.be/oS9iUqjaSVE
https://youtu.be/FxM7Hc3m1XA
https://youtu.be/w_9fH71qNi0
A couple of upper control arms. One is solid, the other is two pieces
https://youtu.be/9okeKNoYEjA
https://youtu.be/9okeKNoYEjA
Ball joint covers for the above arms. I stalled/crashed the spindle in the just after the 1min mark
https://youtu.be/zRDEdBt44vw
Nearly wet myself
https://youtu.be/6u4CaFaiSNg
There's more on my bluehandsvideo youtube channel, so I'll call this enough for now.