[sbaumgarten]

Hello,
I am a member of a robotics team and we recently picked up a Bridgeport mill with a Millstar III hooked up. There doesn't seem to be much information about it on the internet. I finally got it booted up and it's running Windows 95. On the desktop there is a button labeled "Millstar shortcut." There's no mouse or keyboard (just a keypad built into the machine). Does anyone have any experience with this controller? I've attached a picture of the model for reference. Thanks so much in advance for your help!

Attachment 231468

[Marty_Escarcega]

I realize this post is a little old. Did you ever get the information you were looking for? I have a knee mill with a Mitutoyo Millstar III control on it. I have some information on it. Ironically, there is still a support tech at Mitutoyo that knows the control fairly well and has been great to give info on it.
Marty

[sbaumgarten]

I've been able to get the machine to start working; however, I've ran into a few new problems Would you be able to send me the contact info for the support tech that knows about the controller?