I looking for help in the ratio setting area , I have it set to 10160 encoder counts = 1 in. if I program a G01 X30 F5 the table moves 30 in. I have Versa gage mounted and alinged to the table and the readerhead attached to the spindle I am removing the backlash before the G01 X30 F5 move this appears to me that the ratio setting is correct ?
Futher more if I program a square like this
G00 X0 Y0
G01 X5.555 F100
Y5.555
X0
Y0
this returns to my zero this works fine even if I repeat the G01 X Y moves many
times say 50 times it works . But if I do a G2 or G3 on the first time around it will be off by .0003 on the X and Y readouts and the more times I run it the futher off it gets until it gets beyond the tolerance setting then it errors out. Has anyone had a similar problem is the ratio setting the solution or is it something else ?
I have cnc plus V5.8 and Galil Card DMC-2162 ethernet