586,102 active members*
2,485 visitors online*
Register for free
Login
IndustryArena Forum > Other Machines > CNC Wire Foam Cutter Machines > Help! - MM2001 & GMFC motor movement

Thread: Help! - MM2001 & GMFC motor movement

Results 1 to 2 of 2
  1. 05-31-2007, 11:01 PM #1
    DreamerM
    DreamerM is offline Registered
    Join Date
    Mar 2007
    Posts
    5

    Help! - MM2001 & GMFC motor movement

    Hi

    Today I finished building my CNC hotwire foam cutter. I am using MM2001 & GFMC. When I move the motor "manualy" (in the menu bar) GMFC >> Zero Axis... it works fine but when i try to cut the motors stand still.
    I also tried to work with Jedicut and move the motors via the hidden right menu, i got the same results the motors doesn't move when i try to CUT.
    PLZ help

    Regards
    Maayan
    Reply With Quote Reply With Quote
  2. 10-09-2008, 04:06 PM #2
    MITECH
    MITECH is offline Registered
    Join Date
    Oct 2008
    Posts
    1

    MR MIKE

    YOUR STEPS PER REVOLUTION MUST BE CORRECT ACCORDING TO YOUR STEPPER MOTORS IE: DEGREES PER STEP AND YOUR MM PER REVOLUTION MUST BE CORRECT FOR YOUR SCREW THREAD ON YOUR X/Y AXIS THREADED BARS.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Help on programing the PIC in MM2001
    By DreamerM in forum PIC Programing / Design
    Replies: 2
    Last Post: 08-30-2011, 01:56 AM
  2. GMFC help needed
    By gguidi in forum CNC Wire Foam Cutter Machines
    Replies: 4
    Last Post: 07-26-2007, 01:03 AM
  3. Help on programing the PIC in MM2001
    By DreamerM in forum CNC Wire Foam Cutter Machines
    Replies: 3
    Last Post: 06-01-2007, 10:15 AM
  4. MM2001 v0.62
    By JerryFlyGuy in forum CNC Wire Foam Cutter Machines
    Replies: 1
    Last Post: 12-07-2005, 02:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules