Wandering how others would machine. Will be running in a cnc swiss and the material is
kovar
Wandering how others would machine. Will be running in a cnc swiss and the material is
kovar
stop wandering, get rid of the job.
Colby~
This material is soft and gummy so high positive tools with small radius would be my first consideration.
The part is very simple for swiss a basic turn, mill and part off. I believe your difficulty will be deburring.
unless you have a special collet for the sub spindle. I still would back turn a chamfer on the .1545 dia. and profile the flat with a 90deg endmill
and break all the edges so that when you part off its complete.