Has anyone got a siemens 840D post to suit a hyundai 30M lather with Live tooling/C-axis or alternatively just a siemens 810C/840D 2 axis lather post for gibbscam???
Has anyone got a siemens 840D post to suit a hyundai 30M lather with Live tooling/C-axis or alternatively just a siemens 810C/840D 2 axis lather post for gibbscam???
Big thanks to the people who have supplied me with siemens 810d posts, but unfortunately I actually need either an 810c or 840d post as the 810d post is a fair bit different or else maybe it's just in this part of the world they are different.
hi friends,
I am Nirmal.I need a post processor for sinumeric 810D in mastercam.Kind hearted friends please help me to solve my problem.Thank u friends
hey i think i will join the line asking any souls out there if they have a post processor for the siemens 810d turning, for mastercam v9, this controller drives me nuts every time you think it is sorted out it comes and bites you in the ass with another trick up its sleeve, help help help!!!!
Bakes1 has what you seek....reply to thread and we can talk
I have:
Mill Posts:
Siemens - 810m, 820m, 840m, 850D, 850pen, and 840c
Lathe Posts:
Siemens - 801t, 805, 810t, and 820t
Hyundai HiTrol - 805, 840, and 840c
Chad
Hello everyone,
You can find posts right @ e-mastercam.com
IS IT POSSIBLE TO SEND ME SIEMENS 810D MILL & LATHE 810,820 FOR MASTERCAM 9
THANK YOU
KUMAR
E-MAIL [email protected]
hi there i never found a post,
but what i did was i modified the hitachi post in mastercam , which is kind of similar because it uses i and k incrementals, what i found out was the siemens controller accepts straight g-code, but you got to strip all the bells and whistles , so i went thru the code in the post removing strings which generated the bells and whistles although it is not absolutely perfect, and i still have to add the tool in at the beginning, (eg; T01), it works good,
i use cimcoedit5 professional , http://www.cimco-software.com/ , to view the code to see all is well,
in the siemens controller you also need to change it over to g-code for it to recieve the code and work, also when when posting you need to change the file format to .mpf , hope this helps, i will try and upload my modified post
Hi! could you please send those posts for me.
thank you.
kumar19
e-mail [email protected]
hi there the files are attached on the last reply, they are zipped and have instructions inside, just read the readme.txt for examples
please if anyone is clever on post code feel free to configure the post and upload it back to this forum, thanks
Hi !
is it possible to share your posts.
Thank You
kumar
e-mail [email protected]
Hi.
I need postprocessor sinumerik 820M for mastercam x/x2. If somebody can help me, plese contact with e-mail: [email protected]
i need post processor for the siemens 810d mill, for mastercam v9
pl send me my mail id :[email protected]
thanks
hello all professional players, I'm mr.toan. I am delighted that today is known to this web and get acquainted with you. I am also very interested in Siemens 840D controller, but for applications in controlled machine turning-milling 5-axis ,IF you have documents on this issue please post them for me and every one, or you can send to my email: [email protected] nhé. thanks a lot sir.