586,067 active members*
5,369 visitors online*
Register for free
Login

Thread: ratio on x y table

Results 1 to 2 of 2
  1. 06-25-2006, 02:44 AM #1
    dgalaxy
    dgalaxy is offline Registered
    Join Date
    May 2005
    Posts
    160

    ratio on x y table

    if your running a 3 to 1 ratio how do you let mach know this for me 1 rev is 1/3 of an 1inch
    Reply With Quote Reply With Quote
  2. 06-25-2006, 03:40 AM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538
    You enter steps per inch. So figure out your steps per rev, and multiply by 3.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules