Wondering if there is a pre-existing tool library of router bits more akin to wood working for V9. I have created a few on my own but I guess I am just lazy and want to make it easy.
Thread: library of wood tools
Results 1 to 5 of 5
-
11-24-2003, 10:44 PM #1
Registered
- Join Date
- Apr 2003
- Posts
- 57
library of wood tools
We are open 24hrs. - just not in a row.
-
11-25-2003, 02:20 PM #2
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
Mike are you useing Mastercam mill?
There is mastercam Routor that contains a hole libary.
I will have to see about exporting out from Router to Mill.(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
-
11-25-2003, 03:01 PM #3
Registered
- Join Date
- Apr 2003
- Posts
- 57
Using Mill, that would be cool if you could. Mike
We are open 24hrs. - just not in a row.
-
04-23-2004, 12:27 AM #4
Registered
- Join Date
- Mar 2004
- Posts
- 500
Ya, I would be interested in that too please if possible.
Thanks.
-
04-23-2004, 10:47 PM #5
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
I have found that I can pull my libary from router to Mill and use this tool list...
If you have the new disk you can tell during the install the router software.
Of couse sense you key will not let you run Router ,but you can go to NC utiltis and change the libary and go to the tools dir in router.
grab te libary you want...
Hope this helps.(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Reply With Quote
Posting Permissions
