Hello I'm new here.
This is a good website.
I have a question..can somebody help me please?
I've error 4719 : LINK FAULT on BOSCH CC220 controller.
What does it mean?
Sorry for my bad english.
Bye Maurizio
Thread: Problem with BOSCH CC220!
Results 1 to 5 of 5
-
06-28-2006, 09:43 PM #1
Registered
- Join Date
- Jun 2006
- Posts
- 3
Problem with BOSCH CC220!
-
07-01-2006, 07:43 AM #2
Registered
- Join Date
- Nov 2005
- Posts
- 70
bosch c220
hi
some time ago I was programming a retro fitted bosch cc220M on a Mazak M5.
I don't have the manuals anymore but if you could tell me in what relationship the error is to I may be able to help.
my email address is [email protected]
Kind regards
scappini
-
09-10-2008, 04:04 AM #3
Registered
- Join Date
- Sep 2008
- Posts
- 2
Laserino
Hello Maurizio,
4719 error means: LINK FAULTY
An LSV2 Telegram cannot be sent by the CC220 since the link to the computer is broken.
REMEDY: Check connecting cable..
Best Regards,
Nels
-
09-10-2008, 04:09 AM #4
Registered
- Join Date
- Sep 2008
- Posts
- 2
Need Help
Just want to check if anyone of you can help me with my existing problem with our Bosch CC220..How to boot it up? and how to "HOME" the X,Y,Z Axis...Or any step by step instruction so the spindle block will be in its original position?
Appreciate for your help..
Thnks..
-
02-06-2011, 11:04 AM #5
Registered
- Join Date
- Nov 2009
- Posts
- 6
To call the machine to x0 y0 use: G0X0Y0.
Reply With Quote
Posting Permissions
