We have a Nexus 510c with a fusion 640 control. When backing up Mazatrol programs to the computer the file extension was always .m6m. Just recently it changed to .m6p. WTF? Why did it change and how can I have if back?
Results 1 to 3 of 3
-
05-02-2014, 01:08 PM #1
Registered
- Join Date
- Jan 2006
- Posts
- 45
.m6m file extension turns into .m6p
-
05-05-2014, 11:27 AM #2
Registered
- Join Date
- Jan 2006
- Posts
- 45
Re: .m6m file extension turns into .m6p
It took us years to get this machine hooked up to a computer so we could back up our programs because management didn't take us seriously until the hard drive in the machine crashed. Now that we are connected to the computer we thought we were good to go the the computer started changing the extensions on us so now instead of over writing the old programs when we make revisions we get two programs with the same name but different extensions. That's just not going to work.
-
05-05-2014, 07:14 PM #3
Registered
- Join Date
- Dec 2007
- Posts
- 300
Re: .m6m file extension turns into .m6p
M6P is the extension used for saving Mazatrol as 3 digit g-code. Someone is saving the programs in 3 digit format. There is nothing wrong with your machine.
Reply With QuoteSimilar Threads
-
3dm file extension for attachments
By turmite in forum MadCAMReplies: 3Last Post: 06-12-2013, 05:58 PM -
Best file extension to save
By pointcloud in forum RhinocamReplies: 2Last Post: 09-08-2012, 08:49 PM -
Opening CDR file extension.
By terry32506 in forum Uncategorised CAM DiscussionReplies: 5Last Post: 03-02-2008, 05:53 PM -
File Extension Question
By TZ250 in forum MilltronicsReplies: 10Last Post: 08-06-2007, 02:55 AM -
post file extension
By GRANDPA in forum MastercamReplies: 3Last Post: 03-22-2007, 04:44 AM
Tags for this Thread
Posting Permissions
