I have a problem with Agie wire cut machine.
The problem is wire broken when start cutting condition.
Please let me know how to adjustment tension of wire or other solution for solve it.
Thank you.
Kittiwat
I have a problem with Agie wire cut machine.
The problem is wire broken when start cutting condition.
Please let me know how to adjustment tension of wire or other solution for solve it.
Thank you.
Kittiwat
FW ( will adjust wire tension) is more then likely set to high tension , would try setting CW= 2 ( CW wire type) and FW= 10 at to start out
Normally it is just a lower power setting for entry and exit not tension change.