Hi
My Hardinge VMC 600 II with Siemens shopmill 810d has lost the correct orientation position on toolchange. It is now not at the right angle when the carousel is coming in to change tools.
Does anyone know how to reset to the correct position?
Results 1 to 1 of 1
-
05-03-2014, 11:28 AM #1
Registered
- Join Date
- Jun 2011
- Posts
- 26
spindle not orientating to correct position
Reply With QuoteSimilar Threads
-
Loosing the correct position.
By Johanan in forum Machines running Mach SoftwareReplies: 0Last Post: 01-09-2014, 08:27 AM -
VF4 10,000 RPM NO Horsepower! What is the correct wiring layout at the spindle motor?
By davidkress08 in forum Haas MillsReplies: 4Last Post: 10-03-2013, 07:19 PM -
Correct wire gauge for 2.2kW spindle
By cnc3678 in forum DIY CNC Router Table MachinesReplies: 3Last Post: 10-12-2011, 12:58 PM -
Spindle Encoder position
By Ashish B in forum CNC Machining CentersReplies: 0Last Post: 11-17-2009, 04:58 AM -
High speed spindle & correct RPM ?
By Babba in forum Syil ProductsReplies: 6Last Post: 04-24-2008, 10:46 AM
Tags for this Thread
Posting Permissions
