Hi All,
I'm having issues with my axis running properly or smooth. I usually run circles for testing how well it's running. It's a pretty simple setup that I recently upgraded, control box is running a Gecko g540 with 570oz Nema 23s, single motor X axis, using a pulley and belt (XL037) system (which may be the next upgrade on my table to rack & pinion/gear racks).
So I spent a better part of my Sunday tuning and calibrating the axis until I was getting perfect circles. Come in on Monday to cut some production parts and it's way off immediately. Please see attached pics. I realized one pulley was loose on the motor shaft which accounted for one which is really bad, but when I made sure everything was snug and moving smoothly, still getting ovals with really flat tops?
Any suggestions would be appreciated. I'm pretty sure I'm not dealing with any noise issues.
Thank you,
Greg