586,072 active members*
4,401 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > hurco BMC30 spindle does not rotate

Thread: hurco BMC30 spindle does not rotate

Results 1 to 2 of 2
  1. 05-08-2014, 12:07 PM #1
    D-G
    D-G is offline Registered
    Join Date
    May 2014
    Posts
    9

    hurco BMC30 spindle does not rotate

    Hello! Help who than can
    There is a machine Hurco BMC 30 (spindle drive Fanuc A60B-6055-H112, CNC Ultimax II). When you turn the spindle rotation writes "Agree signal failure" - the spindle is not even trying to pull away. Somebody faced with these drives? Prompt where the drive must come ON signal and the reference signal(DAC). And also where to see the issue whether the drive signal AGREE
    sorry for my bad english
    Reply With Quote Reply With Quote
  2. 05-12-2014, 06:10 AM #2
    D-G
    D-G is offline Registered
    Join Date
    May 2014
    Posts
    9

    Re: hurco BMC30 spindle does not rotate

    Please, very need help:drowning:
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Hurco BMC30 system/HDD problems
    By PPG78 in forum HURCO
    Replies: 4
    Last Post: 06-25-2021, 09:33 AM
  2. Hurco BMC30 wash down pumps
    By anchovy in forum HURCO
    Replies: 5
    Last Post: 03-03-2013, 05:00 AM
  3. Hurco BMC30 tool change problem.
    By scottjkolb in forum HURCO
    Replies: 6
    Last Post: 11-25-2011, 09:34 PM
  4. Hurco BMC30 spindle problem
    By electromech in forum Benchtop Machines
    Replies: 4
    Last Post: 04-07-2008, 10:43 AM
  5. Hurco BMC30 spindle problem
    By javed08 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 08-08-2007, 05:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules