[LisBonMekat]

Hello to all..

First in agenda my apologizes if my problem already answered in other thread, but i didn't found it.

So here is my problem:

Im using Mach3 for a home made router, i installed it in a laptop just to practice and on a desktop to work, on my laptop the M3 command activates the output1, but on the desktop i cant do that.

The settings in both computers are equal on general settings and on spindle setup.

If i hit "Spindle toggle" or F5 the output enables, but not with M3 command.

M7 and M8 work fine with outputs 4 and 3.

Greetings from Lisbon...

[Kenny Duval]

Go to ports and pins then to the spindle settings tab and verify the m3 and m4 out put settings.

[LisBonMekat]

Many Thanks Kenny, its allready working... Reinstalled Mach3..