I'm new to all of this stuff. New to the shop I'm at, trying to get some perspective from outside the shop.
we are machining a new part and the amount of time it's taking is going to result in the shop losing the client. Should a programmer be working from the print or the advice of the machine operator. Normally the programmer writes the program and then it goes to the floor.
Results 1 to 2 of 2
-
05-08-2014, 06:48 PM #1
Registered
- Join Date
- May 2014
- Posts
- 2
Machine guy telling programmer what to program
-
05-08-2014, 06:51 PM #2
Registered
- Join Date
- May 2014
- Posts
- 2
Re: Machine guy telling programmer what to program
The part is not very complicated or large. The machine guy has scrapped four parts in his efforts and broken several tools. Everyone in the shop is making comments about the length of time.
Similar Threads
-
Newbie speeds and feeds, what is it telling me?
By rlrhett in forum Uncategorised WoodWorking MachinesReplies: 5Last Post: 03-31-2014, 08:46 PM -
Story telling through design
By cncadmin in forum EnRouteReplies: 0Last Post: 10-13-2012, 09:40 PM -
Tree 325 retrofit - question about what electrical diagram is telling me
By nickcornilsen in forum Dynomotion/Kflop/KanalogReplies: 1Last Post: 10-01-2012, 07:58 PM -
Telling tormach 1100 where the cutter is
By Zburhop in forum Tormach Personal CNC MillReplies: 3Last Post: 06-15-2011, 07:06 PM -
telling it the spindle tool
By underdog in forum HURCOReplies: 0Last Post: 02-22-2011, 10:27 AM
Tags for this Thread
Posting Permissions
