Ok we have a Ganesh 5212tm lathe running fanuc oi-tc. Connected to it is the Ganesh V-65LE bar feeder. We want to disconnect the bar feed from the machine and use a manual air bar feeder. Problem is when we unplug the bar feed from the machine we get a bar feed alarm and the machine locks us out. So anyone know what wires to disconnect or if there is a parameter we can change to get this working?
Results 1 to 3 of 3
-
05-09-2014, 05:36 PM #1
Registered
- Join Date
- Jun 2013
- Posts
- 5
Un hooking bar feed gives an error
-
05-09-2014, 07:19 PM #2
Registered
- Join Date
- Jun 2004
- Posts
- 511
Re: Un hooking bar feed gives an error
That will depend on your ladder, and wiring diagram. Each machine builder does it to their print. If you have the print for the bar feeder you can make a dummy plug to let the machine see what ever inputs it needs.
-
05-10-2014, 08:16 PM #3
Gold Member
- Join Date
- Mar 2003
- Posts
- 2932
Re: Un hooking bar feed gives an error
There may be a Keep Relay that tells the control there's a bar feeder attached... at least there is on the Doosan lathes I've worked on.
Reply With QuoteSimilar Threads
-
DMC 60 H hi-dyn, 840D ~ MSG ... M00 causes error '600607: SPI-LK,feed stop'
By brickie in forum SIEMENS -> Sinumerik 802D/808D/810D/828D/840DReplies: 5Last Post: 03-05-2022, 09:08 PM -
Mach3 Feed Hold Error
By MRM RCModels in forum Mach MillReplies: 11Last Post: 05-26-2014, 10:11 PM -
No feed rate error in FeatureCam
By drj_95018 in forum FeatureCAM CAD/CAMReplies: 1Last Post: 07-11-2011, 09:49 PM -
Tape Drip feed on Meldas50 - P32 Address Error
By firechcken in forum DNC Problems and SolutionsReplies: 5Last Post: 05-26-2008, 03:16 PM -
Hooking it all up
By Dylwad in forum DeskCNC Controller BoardReplies: 6Last Post: 05-02-2005, 06:38 AM
Tags for this Thread
Posting Permissions
