586,077 active members*
3,924 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Stepper Motors / Drives > help for buy boards and motors

Thread: help for buy boards and motors

Results 1 to 3 of 3
  1. 05-14-2014, 01:50 PM #1
    octubrq
    octubrq is offline Registered
    Join Date
    May 2014
    Posts
    2

    help for buy boards and motors

    hello ,sorry for my english . I have a 270ocz NEMA23 motors and I built a new home cnc. do not have much power and I would like to buy a new kit that was faster and powerful. the machine is for cutting mdf. can help me?
    Attached Thumbnails Attached Thumbnails 1.jpg  
    Reply With Quote Reply With Quote
  2. 05-14-2014, 04:47 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538

    Re: help for buy boards and motors

    Are those 5mm pitch ballscrews? If so, they will be the limiting factor in how fast you can go.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 05-14-2014, 04:53 PM #3
    octubrq
    octubrq is offline Registered
    Join Date
    May 2014
    Posts
    2

    Re: help for buy boards and motors

    yes are 5mm pitch ballscrews. what motors and board you recommend me for my cnc? or full kit . thanks
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Open Source Boards Available, Stepper Drivers and Break Out Boards
    By pminmo in forum Open Source Controller Boards
    Replies: 762
    Last Post: 06-23-2018, 01:46 AM
  2. RESOLVED! Mach3 MaxNC enabled = 1/4 speed motors , Disabled = no running motors.
    By BIWVince in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 02-22-2013, 09:28 PM
  3. Are these motors suitible for the tb6560 driver boards
    By prcdslnc13 in forum Stepper Motors / Drives
    Replies: 9
    Last Post: 10-03-2011, 08:26 PM
  4. What wire to use to hook up motors to driver boards
    By dennisyuki in forum DIY CNC Router Table Machines
    Replies: 8
    Last Post: 07-21-2011, 02:35 PM
  5. Wanted Fanuc Servo Motors and boards
    By CNCMAN 83 in forum Want To Buy...Need help!
    Replies: 1
    Last Post: 07-07-2010, 06:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules