[einarkol]

Hello all !

I have used my CNC router for making nameplates on funeral stuff and it is simple for me using my Corel x5
and SimplyCam to engrave 2ply vinyl.
I do 2D but now I like to start making wooden buttons for clothing. 25mm to 50mm in diameter. But I need
someone that owns or makes ready made .NC files by order for making buttons as I understand to be 3D.

Help would be vey much appreciated.

Please contact me if you have any ideas...

Einar
Iceland

[coherent]

You need cam software capable of doing what you want. Look at Vectric Aspire or Artcam. I don't know if SimplyCam will do so as I've never used it. The ones I mentioned will work or likely others. If sounds like you are talking about designing/carving a 2 1/2D design on a round flat or dome shaped surface. These programs will do that and produce the gcode/ncode to run on your machine. I know folks use Artcam products for some very intricate stuff including jewelry. Go to their web sites and review the software and what they are capable of doing.

[stlturber]

Закончив 3D модель, ??? ??????? ???????????? Stller? ??????.?????? свяжитесь со мной по скайпу- warklim