Hi, this is first time a have bought these bits from ebay, and it seems to me there is something wrong. I ordered package with 5 30o 0.2mm v-bits, with 3.175 mm (1/8) shank. I had doubts if this is 0.2mm tip so I made photo, imported it into Solidworks and measured. From that, a tip is 0.08mm. So, from the image in attachment, is it possible to say if it is 0.2mm or not? When I complained about this, seller asked if they are all like this or only one. I looked at others from package, just to discover that they are different in size and geometry, what is visible from other photo. What to do about this?

Thanks for help.

Mario