We recently bought a used Okuma MC-4VAE with the OSP5020m control. I have a 20 pot tool changer but some of the pots are not operable. Under the tool data pages these pots are marked N/A. It has me limited to only 10 useful pots. In the old manual there are several pages that have been lost and the info I am looking for are most likely on those lost pages. Doing some reading I see that you can make the tool changer skip pots to allow the use of "large diameter" tools. Is there a code that will make these pots operable again if that is what is going on here to start with?
Thanks for your help.