I have a BP Discovery 308. Circa 1996. It is making an obnoxious belt squeal that corresponds to the spindle turning. Before I take out the book and start pulling covers, I was hoping you guys could give me a little heads up on what I am in store for and what to pay particular attention to.
Thanks,
CD
Thread: Discovery 308 Belt squeal?
Results 1 to 1 of 1
-
05-22-2014, 10:32 PM #1
Registered
- Join Date
- Mar 2009
- Posts
- 62
Discovery 308 Belt squeal?
Reply With QuoteSimilar Threads
-
fADALVMC 4020 High pitch squeal
By awjjim in forum FadalReplies: 1Last Post: 06-04-2013, 02:53 AM -
cutter squeal case emergency stop message
By robinhood2b in forum Bridgeport / Hardinge MillsReplies: 2Last Post: 12-22-2012, 09:35 PM -
Stepper Squeal/Whine at higher voltage ... So close, but yet so far
By Johnsnd in forum CNC Machine Related ElectronicsReplies: 10Last Post: 12-12-2010, 07:06 PM -
Belt size/spec for Sieg X3 driving belt
By rashid11 in forum X3/SX3/G0619/G0463Replies: 0Last Post: 02-10-2007, 02:01 PM -
Whine / squeal noises when machine idle
By bkraz in forum Bridgeport / Hardinge MillsReplies: 5Last Post: 02-09-2006, 12:29 PM
Tags for this Thread
Posting Permissions
