this came with my mill when I bought it, but I dont think it was actually part of it, it was just laying inside it
however, it may have something to do with it...although I dont really see how. the mill is a mini mill and this machine thing is bigger than its bed.
it appears to be two linear actuators, each mounted on two rails, with a screw and motor. the screw may be ball screw.
then, perpendicular to all that, there are four linear ball bearing bearings which look to allow two larger rails
as if this were the "X" axis and the Y axis is some larger piece of equipment
whats weird is the front
there are two "flags" welded to each linear actuator which come out the front, sort of like position indicators..there is a sticker that says "PHS2" near one
and there are two circular passages with orings on the front two..dont seem connected to the main mechanism though
WTF is this???
Id like to tear it apart for its goodies but Id hate to do that if its actually part of some machine someone needs...it looks a little shop-made though..not so much part of a commercial machine
any ideas?!?!?!!?!?!