I thought I remembered seeing a kit for this but after checking CNCrouterparts site I couldn't find. Would I be able just buy the PRO Nema 34 drive spindle and replace it with my Standard 1? On the Pro Nema 23 drive spindle it says backward compatible but didn't say with the Nema 34.
Results 1 to 2 of 2
-
05-27-2014, 04:09 PM #1
Registered
- Join Date
- Mar 2010
- Posts
- 813
Converting Standard N34 rack and pinon to pro
-
05-27-2014, 09:17 PM #2
Registered
- Join Date
- Jun 2013
- Posts
- 88
Re: Converting Standard N34 rack and pinon to pro
We have upgraded the PRO Rack and Pinion system this year with some new features. The architecture of the new PRO system now allows a PRO Nema 23 Rack and Pinion to be upgraded to a PRO Nema 34 system very easily, however upgrading from a Standard system is no longer available through the website with the new PRO version. We do have stock of the older style PRO components, so we can upgrade units to the old-PRO system on a case by case basis. Email us for availability and cost. [email protected]
Best regards,
Cory
Reply With QuoteSimilar Threads
-
Torchmate Rack and Pinon Gear Cleaning
By PHSS in forum TorchmateReplies: 8Last Post: 04-26-2010, 04:38 PM -
Converting Soft Rack to Leadscrew NEED HELP
By jstrait76 in forum Linear and Rotary MotionReplies: 3Last Post: 01-10-2010, 09:36 PM -
Rack and Pinon Help Simple Question
By Cartierusm in forum Linear and Rotary MotionReplies: 0Last Post: 10-05-2008, 11:54 PM
Tags for this Thread
Posting Permissions
