Does anyone still have the KTK manual and the maintenance course notes? Would be a great help. Thanks in advance.
keith
[email protected]
Does anyone still have the KTK manual and the maintenance course notes? Would be a great help. Thanks in advance.
keith
[email protected]
Thanks
:cheers:
Maybe off track here but could the problem be a lock out in the control like the BTC does when the way lube is low or the switch in it is defective? It was too much trouble to have a light to display when the oil was low or a fault code displayed and the machine stops at the next tool change without telling you of any fault!! Wont move power down restart no help Add oil and presto its up and going would be a nice feature since the Bejure is hidden inside a cabinet. Just a thought . Keeping old machines running is almost as big of challenge as getting help out of new machine dealers. over the last forty years I have bought many New & Used Machines and most of the time the sales rep/service guy disappears once He gets his commission check , until he thinks you are looking for something new. Many things can be fixed by talking with other owners Thank You CNC Zone for the platform to do so .
manuals
I have bridgeport intract 4 with 151 control
My issue is when i give spindle speed 500 and give the command M03 so spindle run but when i ups or down spinlde dimmer. Spindle takes so high speed.
Please help me i am in trouble
Please give me the wiring diagram of contraves spindle drive with bridgeport intract 4 series 2.
My email address is [email protected]