I have the mashine "chiron" with control "fanuc 21Mb". On the mashine the time counter and part counter dont Works. In "Operators manual" have I see, for part counting is the parameter #3901#. I have tray in MDA time counter write: "#500=#3901", but then show me the error massage: "115 invalid wariable nummer"!?
Results 1 to 2 of 2
Threaded View
-
06-05-2014, 08:21 AM #1
Registered
- Join Date
- Jun 2009
- Posts
- 146
chiron with fanuc 21Mb - problem with the part counter and time counter
Reply With QuoteSimilar Threads
-
Time counter
By hartan in forum SIEMENS -> GENERALReplies: 7Last Post: 07-06-2014, 01:38 PM -
Chiron FZ12 W Fanuc 21MB
By singist42 in forum FanucReplies: 7Last Post: 04-08-2014, 04:10 PM -
Help with my 'part counter' please
By buffaloguy in forum MetalWork DiscussionReplies: 6Last Post: 05-14-2011, 12:23 AM -
Part counter
By 1234567 in forum FanucReplies: 5Last Post: 03-29-2010, 07:37 PM -
Changing Fanuc part counter increment?
By gearsoup in forum FanucReplies: 4Last Post: 06-23-2007, 01:50 PM
Tags for this Thread
Posting Permissions
