[bonesclarke]

i run a amada apelio laser turret i have a prob with punching not piecing sheet and inconsistent forming
this prob was only there when using auto or f1 on phnc control but now it doing it on all speed settings on phnc
accumulators were checked and pressure corrected but to no avail the machine is hydraulic
all settings for tool heights are correct
it seems to be a pressure prob with pump or something in the ram head
any ideas anyone

[Barbwier]

My Amada machines lost all parameters because of long electric failure and the batteries did not hold.
When the power was restored the Amada machines already had lost everything.

Amada Apelio II 357 05PLA( Combi machine Laser Punch )

Amada Pega 244 04PC ( Punch Machine )

Do you have backup parameters for this machines if possible also the MMC parameters.

[AMADAJOE]

My Amada machines lost all parameters because of long electric failure and the batteries did not hold.
When the power was restored the Amada machines already had lost everything.

Amada Apelio II 357 05PLA( Combi machine Laser Punch )

Amada Pega 244 04PC ( Punch Machine )

Do you have backup parameters for this machines if possible also the MMC parameters.

I have a list for the Apelio with macros. I have list for 244. What size turret do you have on P244?

Email me
[email protected]

[RanaAli]

hi
sir can you help me last week machine have lost all machine parameter can you give us backup
My id is
[email protected]
with hope full response
with best regard
rana