Re: Cutting advice for cork
Originally Posted by
herby08
you could use the PPI setting for cutting if your program has it and very important is the airassist in such cases . I cut 1/4 ordinary underlayment cork with my 40W machine with no problem and one run. I don't know this corkprene this could have a filling what avoid the cutting .
greetings
PPI settings has nothing to do with chinese lasers.
CW (Continuous Wave) lasers are not pulsed lasers like RF`s.
When you cut using CW laser it is just on or off.
Also "upgrading" from LaserCut Leetro to AWC608 for CW laser is waisting money.
CNC lasers, constructions, service