[heartlnd]

does anybody use dolphin cam lathe with the above mentioned
fanuc control?
I'm having problems in finding the right postprocessor for it.
any help would be greatly appreciated.

[email protected]

[andre-dolphin]

Hello,

I have attached a post for the Fanuc 0. Is should be close to what you need.

When you have unzipped the file, follow these instructions please.

IMPORTING POSTS

Having received a new or modified post processor, you will need to import it.

To do this double click the PartMaster Post Processor icon from your desktop, from the top toolbar choose Import
and browse to the folder where the modified post processor was saved.

When the file has been imported you will see the contents in the display area, next choose Compile from the top toolbar to create the .ppx file.

The new post-processor is now ready for use. Close the post-processor by using File > Exit.

When you next run DCAM or DWES the post processor will appear in the drop down list along with all original posts.