I am having trouble getting Mach3 to do a profile cut using Dolfincam. I get a Radius end of arc differs from radius start. I'm using the T_Mach3DCSS post processor. I'm cutting a ball on the end of a rod. Any Help would be greatly appreciated.
Thanks
Donald Clifton
Results 1 to 4 of 4
Threaded View
-
06-29-2014, 03:12 PM #1
Registered
- Join Date
- May 2003
- Posts
- 132
Radius to end of arc differs from radius start
Reply With QuoteSimilar Threads
-
021 start radius end radius error
By XAD in forum TreeReplies: 55Last Post: 06-01-2012, 04:59 PM -
Radius to end of arc differs from radius to start on line XX
By az_356 in forum Dolphin CAD/CAMReplies: 7Last Post: 10-06-2011, 04:43 AM -
Radius to end of Arc Differs From Radius to Startline
By Bob La Londe in forum Machines running Mach SoftwareReplies: 2Last Post: 08-10-2010, 03:16 AM -
"Radius to end of arc differs from radius to start on Line #"
By labuda in forum G-Code ProgramingReplies: 8Last Post: 11-15-2009, 01:35 PM -
Radius to end of arc differs from radius to start?
By Jamy in forum LinuxCNC (formerly EMC2)Replies: 2Last Post: 08-23-2009, 05:28 AM
Tags for this Thread
Posting Permissions
