586,110 active members*
3,212 visitors online*
Register for free
Login
IndustryArena Forum > OpenSource CNC Design Center > OpenSource Software > digitizing software for GRBL/UGS arduino system??

Thread: digitizing software for GRBL/UGS arduino system??

Results 1 to 2 of 2
  1. 01-14-2024, 06:16 PM #1
    tkms002
    tkms002 is offline Registered
    Join Date
    Mar 2011
    Posts
    357

    digitizing software for GRBL/UGS arduino system??

    I have a diy arduino based CNC router. It runs GRBL and I send GCode with UGS. Works great. I want to get into cutting foam decking for boats and am hoping some of you may suggest a way to digitize patterns using my set up. Do I need additional software to do this? Hardware?
    What would you suggest?
    Thanks
    Reply With Quote Reply With Quote
  2. 02-07-2024, 08:18 AM #2
    Josh_Carr
    Josh_Carr is offline Member
    Join Date
    Mar 2020
    Posts
    1

    Re: digitizing software for GRBL/UGS arduino system??

    I would love to have this feature also. Seems like bCNC is the best way but its usually only for levelling surfaces. For advanced scripts that probe not just in the z direction, might have to look at Mach3/4. Depending on your shape bCNC should work. There's also grbl-plotter height scan and also UltimateCNC Autolevel.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Arduino Shield CAD-CAM and CNC Software for GRBL 1.1 f
    By fstmar in forum Controller & Computer Solutions
    Replies: 0
    Last Post: 06-12-2019, 01:42 AM
  2. Woodpecker GRBL 3018 UGS Errors
    By Stephen_A in forum Chinese Machines
    Replies: 0
    Last Post: 03-17-2019, 12:30 AM
  3. any issues using dmap2gcode with UGS and GRBL
    By tkms002 in forum OpenSource Software
    Replies: 1
    Last Post: 09-20-2018, 05:18 PM
  4. New DIY CNC Arduino Nano+GRBL+UGS
    By gerbilovsky in forum DIY CNC Router Table Machines
    Replies: 8
    Last Post: 10-24-2017, 01:56 PM
  5. VCarve Pro compatibility with Arduino/Grbl Control Software
    By tdcnc in forum Post Processors
    Replies: 1
    Last Post: 03-17-2017, 11:45 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules