Hello Tebis user
Is anyone using “re-work corners”?
What do I have to consider?
I currently have a component part with pretty deep and small radii...
Please no reference to the manual or the Tebis hotline ;-)
Kind regards Matz
Hello Tebis user
Is anyone using “re-work corners”?
What do I have to consider?
I currently have a component part with pretty deep and small radii...
Please no reference to the manual or the Tebis hotline ;-)
Kind regards Matz
<span style='font-family:Times'><span style='color:blue'><span style='font-size:14pt;line-height:100%'>Nicht alle Schalker sind Psychopaten - aber ich</span></span></span>
There is not a lot to consider..
RCorn is only for reworking one corner. Related to Rfill because only ball cutter work- as the tool and as the forerunner.
You can clear the corners in several steps by dividing the maximum depth into several cutting depths.
e.g. max depth = 2mm cutting depth=0.6 means 3 steps a 0.6mm and one with 0.2mm.
You can decide in the CNF when processing fillets if you want to do the step with 0,2mm first or at the end ( more practical)
Regards