[rcrabb]

I'm looking for some info about servo II systems. I need to find some software to run the system from a PC. I'm not familiar with the RS232 conection. If anyone uses a servo II system and has knowledge to share I'd like to here from you.

[Roodesign]

Hi there, I have a servo II mill that I just love!

if you need the dos software, I can send you a copy...they give that one out free...

the challange is to find a computer to run on dos! and then, if you want to network that machine!

anyway, it's a great machine, and if you need software I can probably help you out...I have a post for mastercam 6.1 that works pretty well as well if that is useful.

let me know....

[Cherokee]

Does the Servo post do the canned drilling operations ok?

[Grey]

Hi there, I have a servo II mill that I just love!

if you need the dos software, I can send you a copy...they give that one out free...

the challange is to find a computer to run on dos! and then, if you want to network that machine!

anyway, it's a great machine, and if you need software I can probably help you out...I have a post for mastercam 6.1 that works pretty well as well if that is useful.

let me know....

Hi, I have the same system. Could I please get a copy of that software? Do you still have the mastercam post? Could I get that also. Thx a bunch !