We’re offering our new freeware CNC editor on the Virtual Gibbs homepage.
Our DNC solution is also free integrated.
If someone wants to integrate the editor into Gibbs, one can make a link to the exe file under Posting\Post Editor Setup
Thread: Freeware editor
Results 1 to 5 of 5
-
06-07-2008, 05:47 PM #1
- Join Date
- Aug 2003
- Posts
- 346
Datentechnik Reitz GmbH & Co. KG<br />Händler und Support von<br />Sprutcam, Eureka, Blechcenter, Vector<br />T:06461 / 7593437<br />F:06461 / 7593438<br />www.cnc-Technik.de<br />[email protected]
-
06-07-2008, 07:16 PM #2
- Join Date
- Jun 2005
- Posts
- 100
Hello,
I can find only a trial version on this page, but not freeware. Trial and freeware are not the same thing and a trial version sohuld not be described as freeware.
Regards
Reini2
-
06-08-2008, 09:49 AM #3
- Join Date
- Aug 2003
- Posts
- 346
The software is FREEWARE.
Just use the first link in the download area.Datentechnik Reitz GmbH & Co. KG<br />Händler und Support von<br />Sprutcam, Eureka, Blechcenter, Vector<br />T:06461 / 7593437<br />F:06461 / 7593438<br />www.cnc-Technik.de<br />[email protected]
-
06-08-2008, 01:10 PM #4
- Join Date
- Jun 2005
- Posts
- 100
Hello timeskript,
Sorry, I didn’t click far enough/ didn’t look exactly enough.
I hope you’ll forgive my snap conclusion.
Regards
Reini2
-
06-08-2008, 05:10 PM #5
- Join Date
- Aug 2003
- Posts
- 346
Sure!
Datentechnik Reitz GmbH & Co. KG<br />Händler und Support von<br />Sprutcam, Eureka, Blechcenter, Vector<br />T:06461 / 7593437<br />F:06461 / 7593438<br />www.cnc-Technik.de<br />[email protected]
Reply With Quote
Posting Permissions
