586,682 active members*
2,859 visitors online*
Register for free
Login

Thread: Hooking a Probe

Results 1 to 2 of 2
  1. 07-25-2006, 09:10 PM #1
    Tazzer
    Tazzer is offline Registered
    Join Date
    Jul 2003
    Posts
    71

    Hooking a Probe

    Debating beween Xylotek and Hobby CNC and was wondering if anyone has hooked up either a DIY probe or the Desknc probe to a hobbycnc board. I am leaning towards the hobby primarily all of the great feedback but I want to have a probe on my machine for a couple items and thought I would check first. Any info would be great.
    Reply With Quote Reply With Quote
  2. 09-12-2006, 02:20 AM #2
    guitarattack
    guitarattack is offline Registered
    Join Date
    Aug 2006
    Posts
    6
    I just hooked a probe up using my HobbyCNC rig and TurboCNC v 4.01. I used the limit power out of the HobbyCNC board, and pin 11 into TurboCNC for the probe. I've built several home-brew probes...I may have finally got one that will work properly on this last try!

    John
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules