[MC50]

Hello!

We’re going to commission a turning machine Strands SMG-2 Typs.
Unfortunately we don’t have documentation or manual guide for Fanuc.

Who can help?
Maybe someone has a list of parameters.

Controller Fanuc OTF Nr 9072009 (with C.A.P.)

Thanks!

[MC50]

... what can be wrong in this program? There’s an error 065 in N100.

We have the same problem with G72

Thanks

O2021
N10 M31
N20 M21
N30 M13
N40 G28 U0. W0.
N50 G50 X260. Z100. S3000
N60 T0200
N70 G97S350M3
N80 G00X55.Z3.T0202
N90 G71 U2. R1.
N100 G71 P110 Q170 U0.5 W0.2 F0.2
N110 G00 X110. Z2.
N120 G01 X40.6 Z0. F0.1
N130 G01 Z-1. X42.6
N140 G01 Z-30.
N150 G01 X48.
N160 G01 Z-36.
N170 G01 X55.
N180 G70 P110 Q170
N190 G00 Z50. X150.
N200 M5
N210 M30

[CNC-Tornado]

Hello MC50,

maybe the 0T can’t handle cycles with two call lines.
As far as I remember everything has to be in one line.

But I haven’t worked with 0T for a long time...

Regards

Rainer

PS did you read my PM?

[CNC-Tornado]

Hi MC50,

take a look here

G72 for Fanuc 0T

regards

Rainer

[MC50]

Hello
I wrote the program according to the suggestions of inet and to your link... so it should work...

@Rainer,
yes, I read the PM, thanks!

Regards and good night!

[Kenny666]

Hello!

Maybe the cycles aren’t unlocked?
It costs extra at Fanuc.

I’ve had a similar problem

Regards

Kenny666