[Lodoos]

Hello everybody

Our company bought a used MAXIMART VMC 65E with controller FANUC 0-MD.
The operator has unfortunately deleted the subprogram for tool changing. I have the program but the gateway for data transfer is broken, so I’ll have to type it manually. But I don’t have an idea how I can type special characters. There aren’t any keys for them.
The characters are: : # = [ ]

Could anybody help?

Greetings

Lodoos

[edm-dsc]

Hello everybody

Our company bought a used MAXIMART VMC 65E with controller FANUC 0-MD.
The operator has unfortunately deleted the subprogram for tool changing. I have the program but the gateway for data transfer is broken, so I’ll have to type it manually. But I don’t have an idea how I can type special characters. There aren’t any keys for them.
The characters are: : # = [ ]

Could anybody help?

Greetings

Lodoos

Hello

Some keys have 2 symbols. You access the second symbol with the shift key. It’s an upward-pointing arrow.
After you press this key, “^” has to appear at the monitor and then you have to press the according key. After each other and not at the same time.

How do you bring programs into the machine?

Greetings

Edit: it’s also possible to transfer programs with Sram card or ATA flash card, or CF card with PCMCIA- adapter. Depending on what your controller supplies.