[esel85]

Hello everybody

I want to mill with an open door and with an electrical hand wheel on my milling machine. When the door is open however, the engine speed only goes up to 130r /min maximum, because of safety issues.

But 130R/min is not enough at all for milling.

How can I increase the maximum engine speed?

Thanks for your answers

[greyhound]

Hello everybody

I want to mill with an open door and with an electrical hand wheel on my milling machine. When the door is open however, the engine speed only goes up to 130r /min maximum, because of safety issues.

But 130R/min is not enough at all for milling.

How can I increase the maximum engine speed?

Thanks for your answers

Well, the 130R/min is not made for milling but rather for Bushing devices.

[edm-dsc]

That makes sense!
Waking up in the morning, not fully awake yet, and taking off all the machine covering.. and in the end the mill goes through the workers head because the hand was still a bit numb… Super !!!


What I want to say is:
It‘s no point saving 2 days of work for a production run if your are unable to work afterwards or even worse your own children have to grow up without their dad.