I have a Fanuc Serie 6 CNC with a defective first serial port (connector M5). Is there a way to enable from software the second serial port (conn. M74)? Thanks in advance...
Results 1 to 1 of 1
-
10-26-2011, 11:38 PM #1
Registered
- Join Date
- Jul 2007
- Posts
- 3
Fanuc Serie 6 defective serial port M5.
Reply With QuoteSimilar Threads
-
Fanuc 10T serial port stopped working
By jolulank in forum FanucReplies: 3Last Post: 07-22-2011, 04:46 PM -
Serial port blown by lighting fanuc 10T
By jolulank in forum FanucReplies: 16Last Post: 07-13-2010, 12:38 PM -
Connecting Fanuc 11M via Serial Port
By Tenretni in forum FanucReplies: 2Last Post: 03-08-2010, 03:48 AM -
Serial Port Issues with GE Fanuc OT-C
By keystoneprec in forum FanucReplies: 7Last Post: 04-05-2007, 03:39 PM -
Fanuc 0T Serial port problem
By a_greavu in forum FanucReplies: 3Last Post: 10-12-2006, 11:31 PM
Posting Permissions
