586,612 active members*
3,594 visitors online*
Register for free
Login

Thread: Change to TFT Monitor

Results 1 to 3 of 3
  1. 02-15-2011, 09:51 PM #1
    c.stiegeler
    c.stiegeler is offline
    Join Date
    Sep 2008
    Posts
    180
    Hello together,

    I've got a 'new' milling machine ( Hurco BMC 45P ).
    So the machine is used and there is some flickering on the screen I thaught of changing the original screens to normal TFT monitors?!
    Anyone ever did this?
    I read in some articles that you need a converter from RGB to VGA, but this was another controller.

    I thank you all for your help.
    Greetings, Christian
    Reply With Quote Reply With Quote
  2. 02-15-2011, 11:24 PM #2
    Olix
    Olix is offline
    Join Date
    May 2007
    Posts
    36
    Hello,

    I know a solution

    http://www.seh-gmbh.ch/galerie/hurco...fit/index.html

    Greets, Olix
    Reply With Quote Reply With Quote
  3. 02-16-2011, 07:20 AM #3
    c.stiegeler
    c.stiegeler is offline
    Join Date
    Sep 2008
    Posts
    180
    Hello,

    thanks for this. My question: what technical solution is behind it? Do I just have to change the connector or is this much more work-intensive?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules