586,106 active members*
3,098 visitors online*
Register for free
Login

Thread: Nexus controller and tailstock

Results 1 to 2 of 2
  1. 10-02-2010, 10:16 AM #1
    talismann
    talismann is offline
    Join Date
    Nov 2006
    Posts
    53
    Hello
    I’m looking for a possibility to use a tailstock without needing sleeve pressure.
    I just want to “insert” a needle into a plastic tube in order to be able to edit the outside diameter.
    Unfortunately, the machine doesn’t work if there isn’t sleeve pressure.
    Even 0,6 kn with M731 are too much for the plastic.

    Regards, Andreas
    Reply With Quote Reply With Quote
  2. 10-02-2010, 12:02 PM #2
    bhfanatico
    bhfanatico is offline
    Join Date
    Apr 2009
    Posts
    34
    Look in your M-code list.
    In case of Integrex, it’s M744, annulment of tailstock locking.
    It means that you have to cancel the locking out with help of M-code before inserting the tailstock.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules