586,634 active members*
3,069 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Mazak, Mitsubishi, Mazatrol > Program step at Mazak VTC 200B and Mazatrol 640M

Thread: Program step at Mazak VTC 200B and Mazatrol 640M

Results 1 to 2 of 2
  1. 03-03-2011, 08:05 PM #1
    Bambule03
    Bambule03 is offline
    Join Date
    Mar 2011
    Posts
    2
    Hello

    I am new here in this forum and I think it is doing a good job!

    Now to my professional problems.
    Recently we work with Mazak VTC 200B. Now I wanted to mill a crank of 170mm and 3mm deep in a stell blanks with a milling head of 63mm.
    A drill of 78mm exists, so that the milling head could immersion in the middle of the workpiece without problems. And than cherry the crank circular.

    Now I tried it via ''Pocket with recess'' - but I cannot choose the face milling cutter as a tool.

    Anybody an idea?
    Thanks
    Reply With Quote Reply With Quote
  2. 03-04-2011, 06:44 AM #2
    Alesi
    Alesi is offline
    Join Date
    Feb 2005
    Posts
    223
    Describe the milling head at the tool data as end mill.
    Greets, Alex
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules