586,701 active members*
2,599 visitors online*
Register for free
Login

Thread: Mazak , Fanuc

Results 1 to 3 of 3
  1. 01-03-2012, 07:18 PM #1
    talismann
    talismann is offline
    Join Date
    Nov 2006
    Posts
    53
    Hello
    Can anybody help me out?
    I would like to know if Mazatrol and Fanuc are really the same.
    I might have another job and they work with Fanuc controller. So it’s really important to know...
    I only know Mazak and Siemens
    Thx Andreas
    Reply With Quote Reply With Quote
  2. 01-03-2012, 07:39 PM #2
    InTex
    InTex is offline
    Join Date
    Feb 2007
    Posts
    4191
    Hello

    Not in Dialog; only under EIA (ISO).
    And only limited cause Fanuc has its differences...
    I would say get ready for a new beginning. However it should not be a problem for an accomplished man.
    Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
    Reply With Quote Reply With Quote
  3. 01-03-2012, 07:49 PM #3
    talismann
    talismann is offline
    Join Date
    Nov 2006
    Posts
    53
    I don’t think it will be that difficult. I just wonder why they write Fanuc/Mazak in the job description.
    In principle they are all the same (in my opinion)...

    Thank you for the quick answer
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules