Hello guys
I have a Haas VF3 with a Haas controller. Yesterday the following error message came up_
‘ALARM 144
Machine will stop Functioning in 99,9 h
Call Dealer for Unlock Code’
I got a ‘Bill Code’ with my bill.
Where do I have to enter it?
Hello guys
I have a Haas VF3 with a Haas controller. Yesterday the following error message came up_
‘ALARM 144
Machine will stop Functioning in 99,9 h
Call Dealer for Unlock Code’
I got a ‘Bill Code’ with my bill.
Where do I have to enter it?
Hello
I have done it in the past and I think I remember the following:
Enter emergency shutdown- setting/graph button- onto serial number- enter Bill code- press ‘write’- done!!
Regards Ogelle
Hello dekas
The bill time code is entered with the serial number- usually you should have an instruction with it that tells you where and how to enter it.
Regards Michael
Gruß Michael<br><br><br><br>
Hey
I just can’t find the input box for the serial number- that’s my problem.
I can change the name, the IP address and many others but no the serial number???
The serial number is under setting no. 26- button Setgraph – General- no. 26
Regards
Michael
Gruß Michael<br><br><br><br>
Hello
I had a look at work today. Approach reference point- open writing security (setting7)
Emergency shutdown- serial number (setting 26) – enter bill code- write enter
Close writing security- finished.
Regards Ogelle